Why:

• Raises Total Alkalinity (TA) of hot tub water
• Low TA causes;
  • pH bounce – difficult to balance
  • Increased corrosion of metal surfaces – staining
  • Etching of plaster, grout
  • Increased risk of problems and major repair costs
• Highest grade mineral available
  • Very fine, granular form
  • Dissolves quickly and fully
  • Food grade – no impurities

When:

• Apply when needed to maintain TA between 125 – 150 ppm
• Always test with fresh fill and monthly thereafter

As a general rule, a Mineraluxe tub requires less testing and re-balancing due to:

• The stabilizing effects of the Mineraluxe system
• The dramatic decrease in products and product quantities applied

How Much:

• To raise total alkalinity:
  • 18 g per 1,000 L raises total alkalinity by 10 ppm
• 1 capful = 10 grams (approx.)

How:

• Always adjust total alkalinity first, before pH or calcium hardness
• Operate pump with air off
• Apply product by sprinkling slowly over water surface in one application
• Circulate for 1 – 2 hours
• Always test and re-balance pH after application of Mineraluxe Alkalinity Plus.