Why:

• Ongoing protection against the risk of staining and scale formation 
  • An Insurance Policy for the pool
• The risk of staining and scale formation is due to; 
  • Periods of water imbalance – pH, total alkalinity, calcium hardness, total dissolved solids are not always in balance. They move and can cause issues if not corrected.
  • The effects of periodic product additions that create localized areas of instability
  • Top-up water – imbalanced and often with dissolved metals 
  • Natural erosion of metals from metallic parts and equipment
• Stain & Scale Cleanse can remove light metal stains and scale, if applied early enough
• All-natural formulation – non-toxic, biodegradable
• Phosphate-free formula
• Will not breakdown prematurely;
  • Stable in presence of sanitizers, oxidizers
  • Allows other products to be added at same time in convenient program

When:

• Use specifically at Pool Opening and Pool Closing for added protection
• Use any time the following conditions arise;
  • The pH rises above 7.8
    • It is essential if the pH rises above 8.2 – scale is certain to form
  • Metals are identified in a water test
  • Your water has a calcium hardness in excess of 400 ppm
  • Your Saturation Index regularly operates at >+.3 on the index
• Anytime scale or stains are noticed in the pool
• Use Stain & Scale liberally;
  • It will not consume sanitizers
  • It will not break down prematurely from sanitizers
  • All natural – leaves no chemical footprint 

How Much:

• For Pool Opening & Closing
  • Apply 125 mls per 10,000 litres
  • 1 bottle treats approx. 80,000 litres 
• When treating metals in pool water;
  • Apply 125 mls per 10,000 litres per 1 ppm of total metals in the water
  • Use with Dazzle Filter Enhance in the filter to remove the metals from the water
• When treating an existing scale deposit or metal stains;
  • Use 250 mls per 10,000 litres 
  • Brush the affected areas regularly
  • Repeat application monthly or until desired results are achieved
• For regular maintenance to prevent stains and scale formations;
  • Use 25 mls per 10,000 litres as part of weekly program

How: 

• Apply by pouring required amount around edges of the pool
• If treating a specific scale formation or metal stain
  • Shut the pump off and allow the water to go still
  • Pour the product directly into the area where the stain or scale is heaviest
  • Allow to sit for 15 minutes – then brush and turn the pump back on