Why:

• Dazzle pH Plus raises the pH of swimming pool water when low.
• A low pH (water that is too acidic) can cause the following issues:
  • Discomfort to bathers – skin and eye irritation
  • Rapid sanitizer dissipation – difficult to maintain a chlorine residual
  • Hyperactivity of chlorine – can lead to fading / bleaching of surfaces more readily
  • Corrosion, etching of pool surfaces
    • metal surfaces corrode leading to expensive repair/replacement and staining
    • plaster finishes etch, leading to rough, discoloured patches where algae grows more readily and can scratch feet
    • vinyl liners lose their elasticity and can wrinkle
• A low pH can cause extensive damage to the pool surfaces, leading to expensive repair

When:

• Test pH as often as needed to maintain consistently at the following ranges;
  • Ideal: 7.4 – 7.6
  • Acceptable: 7.2 – 7.8
• Use Dazzle pH Plus whenever pH is less than 7.4 to bring back to the ideal and effective range of 7.4 – 7.6

How Much:

• If pH is 7.3 – use 30 grams per 10,000 litres
• If pH is 7.2 – use 60 grams per 10,000 litres
• If pH < 7.2 – use 90 grams per 10,000 litres (multiple applications may be needed)

Maximum One-Time Addition:

• Never add more than 250 grams per 10,000 litres per application.

How:

• Ensure that the total alkalinity of your pool water is in the proper range
• With the pump and filter operating;
  • Slowly sprinkle or broadcast Dazzle pH Plus over the surface of the water
  • Allow to circulate for two or more hours
  • Re-test pH and re-apply if pH is still below 7.4