Why:
- For enhancing the filtration capability of any filter type
- A natural cellulose product – it filters to 2 micron
- Fills the pores allowing a much finer filtration of particulate
- Also works as an absorbent on oils, greases, pollutants and metals
- Use as needed to maintain dazzling clear water – as a regular maintenance product
- Constantly polishing pool water for added sparkle
- Removes dead skin, dust, dirt, etc.
- Use as needed to help solve a water clarity issue – a problem solver
- Dead algae, pollen, other natural forms of particulate
- Removes dissolved metals when chelated with Dazzle Stain & Scale Cleanse
- Contains no DE or alum
When:
- Apply after each backwashing or cleaning of the filter
- As needed to assist the filter in overcoming a clarity problem
- Easier to use than traditional pool water flocculants
- Can be used with Dazzle Nature Sheen to speed clarification when results are needed fast
How Much:
- Use as directed on the label
- For sand filters: Use 1½ cups in a typical 24” filter (8 oz cup)
- For cartridge filters: Use 3 cups per 100 sq. ft. of filter area
- For DE filters: Mix 1 part Filter Enhance with 2 parts DE for best results
How:
- Always apply to a clean filter
- Apply by mixing the desired amount into a slurry with water and slowly pouring into the skimmer
- Apply 1 cup at a time, observing the filter pressure as you go
- Once a 1 – 2 psi pressure increase has been reached on the gauge, stop further product additions – you’ve added the proper amount
- Filter continuously until the desired result is achieved
- Watch the filter pressure and clean the filter when maximum pressure is reached
